Tuesday, May 6, 2008

OTC 7068 Upper Control Arm Bushing Service Set


7068

Upper Control Arm Bushing Service Set

Features and Benefits:

  • Includes all adapters needed for quick bushing removal/installation without removing control arm from vehicle.
  • Now you can easily replace press-in type upper control arm bushings on most rear wheel drive Ford, GM, and Chrysler vehicles.
  • Mechanical screw power quickly removes the worn bushing and installs the new one without damaging the control arm.
  • Includes C-frame, screw assembly, and all adapters and inserts necessary to do the job correctly.

Click On: All Information

OTC 7057 U-Joint Remover Tool Set

7057

Joint Service Set for Spicer and Rockwell Universal Joints

Features and Benefits:

  • The 7057 service set removes even the most rusted and corroded bearings easily and mechanically, without damage to costly U-joint components, even where the space is limited.
  • It applies up to 7 tons of force to separate the yoke assemblies and remove bearings the right way.
  • This tool was specifically designed for universal joint removal, eliminating makeshift, sledge hammer methods.

Click On: All Information

OTC 7045B Front Coil Spring Compressor


Features and Benefits:

  • For use on most late model rear wheel drive GM, Ford, and Chrysler vehicles where the spring is located between upper and lower control arms. Engineered for long life, four case-hardened, self-aligning plates ensure proper load distribution of tool components under tension.
  • Front coil spring Compressor.
  • Wt., 13 lbs.
Click On: All Information

OTC 7028 Clutch Adjusting Wrench for Spicer Clutches


Features and Benefits:
  • Adjusting wrench
  • For internal adjustment of multiple lever and angle- spring clutches.
Click On: All Information

OTC 3545 Digital Automotive Tester

Features and Benefits:

To get the same set of functions you would need separate meters/tools costing $1000’s more!
The DAT’s Dual Action Selector wheel and the power and function buttons are conveniently located so you can move leads and probes freely for one-hand operation!

Digital Multimeter

  • Auto ranging for AC/DC Volts, resistance, and amps
  • Measures duty cycle, frequency, temperature and RPM
  • Continuity and diode test capabilities, MIN, MAX, Delta
  • Adjustable logic probe and much more
Battery Drain Test
  • Complete parasitic battery drain tester
  • Includes a self calibration feature
Electrical System Test
  • Look for bad grounds, voltage drops, intermittent connections, or sources of high resistance
  • You can run a charging system test for diagnosing alternators and battery state
Sensor Testers
  • Get a quick and accurate diagnosis of the complete O2 circuit
  • The DAT is capable of sending a rich/lean signal to the ECM and display crossing per second and O2 voltage simultaneously
  • Includes a glitch capture feature so you can identify any dropouts through the range of the TSP sensor
  • Also includes a custom setup for MAP, MAF, EGR, crank and magnetic sensors
Fuel System Tests
  • The LED’s act as noid lights when the DAT is connected to a fuel injector
  • You can also measure injector on-time and peak voltage simultaneously
  • A dedicated mode reads line pressures with the pressure adapter (available separately)
Ignition System Test
  • The DAT is also a complete on-board KV tester
  • You can measure peak voltage or burn voltage with burn time simultaneously
  • Read RPM on 2 and 4 stroke engines
  • The dwell option lets you select number of cylinders
Click On: All Information